How To Refill Your Ink Cartridge

How To Refill Your Ink Cartridge

Refilling ink cartridges is easier than it seems because it is a relatively simple task. It's cheaper than buying new cartridges made by the manufacturer or third-party vendors. Nevertheless, it can be dirty work, but it's a small problem can be easily handled. Here are the steps to follow in refilling ink cartridges.

* To protect the floor from leaking ink, cover job with a newspaper or rag that you do not mind staining. Gathering around LA materials you need. These materials include ink bottles, syringes and cartridges to be filled. In addition to the cartridges, these materials are usually supplied with the packaging ink refill.

* Each printer cartridge ink changes its capacity. Do not forget to check the label or instructions in a set of cartridges, to see how your cartridge in the hand can actually contain. You can then fill the syringe with any color ink you want to go in the first place. In this procedure, preferably in a sink, to avoid confusion and to enhance treatment.

* Punch a small hole in the top of the cartridge to the chamber color ink you want to recharge. The hole should be about their fists on the label on the top of the cartridge. Then simply insert the syringe through the hole you punched. Push it all the way to the bottom of the cartridge. Gradually squeeze the ink from the syringe into the cartridge. Do not place too quickly, and it will lead to foaming ink and includes the air in the chamber. Do not forget to keep the syringe deep inside the sponge, as you can.

* Just do the same procedure for the other colors of ink, which must refuel. Always wash thoroughly with warm water syringe before filling it with another color to avoid mixing colors in the next ward to be replenished. You can also have a different syringe for each color, and name them so that they can be used next time without the need for clean syringe again and again.

* After all the color places have been refilled, cleaned of excess ink-stained around the cartridge.

* Then you must put the seal on the hole you punched earlier, because the right to the top of the cartridge vents.

* Unused or excess ink can be put back into the container bottle.

* It is ideal for installing the cartridge in a few hours to allow him to sit. Thus, it will lead to stabilization of pressure inside.

* Now you can reinstall the cartridge into the printer. Run cleaning cycle several times until there are no gaps in the press.

Always remember that you must not allow the cartridge to run completely. This will lead to drying up of color cameras and force it to be scored.

These guidelines are not hard to follow. However, you can also ask the person selling the replenishment of ink in order to demonstrate how to do it.

How To Refill Your Ink Cartridge